Black Rear Shock Absorbers: Kawasaki EN450 EN 450 (1985-1989) Kawasaki KX65 The coil has 55mm centre

The coil has 55mm centre to centre mounting with 1 spade connector and 1 HT lead with spark plug cap

It has 320mm pin/pin mounting points with both pins being 12mm

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Yamaha YZF R6 for the years and models shown above

Kawasaki ZXR 400 (ZX400 H1-H2) (1989-1990)

Black Rear Shock Absorbers: Kawasaki EN450 EN 450 (1985-1989) Kawasaki KX65 The coil has 55mm centreBrand new set of black rear shock absorbers to fit: Kawasaki EN 450 A1 A5 (1985 1989). This set of rear shocks is designed to replace the original factory shocks on a Kawasaki EN450 for the years and models shown above. It has 325mm pin pin mounting points (check against original as some are shorter) and a 40mm shroud. The top pin is 14mm, the bottom is 10mm (You may need to change these to the required sizes spare bush's sold separately in 2 x 10mm