headstock bearings and seals honda cr50 cr 50 1983 1985 Kawasaki ZXR250 This ignition coil has been

This ignition coil has been manufactured to replace the original stick coil on a Triumph Daytona 650 for the years and models shown above

They have been manufactured to replace the original set of head stock bearings on an RD350 for the years and models shown above

This speedo cable has been designed to replace the original cable on a Honda VT1100 for the years and models shown above

Kawasaki ZZR 1100 (ZX1100) C1-C3 (1990-1992)

headstock bearings and seals honda cr50 cr 50 1983 1985 Kawasaki ZXR250 This ignition coil has beenBrand new set of headstock steering bearings and seals to fit: Honda CR 50 R (1983 1985). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Honda CR50 for the years and models shown above. Top sized: 22. 5mm x 41mm x 12mm. Bottom sized: 24mm x 41mm x 12mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. If you require different